How to set up ftp software and send files to Pechman Imaging using Windows XP systems. Prepare your files and folders for testing or regular orders. See How to Name folders for print sizes. To get your username and password for ftp transfer contact customer service or your lab rep. cs_feedback Lab Phone 800-777-0221 Ftp demo/shareware software is available for download: PC or Mac; BulletProof http://www.bpftp.com Download and install the BulletProof Client unless you already have software and are familiar with it's use. Start BulletProof. It should open to an empty New Session window. If not, choose New Session from the Main menu choice. You will need to enter the following information. Host: ftpzapp.pechmandirect2.com Port: 21 Login: ******* (contact lab for info) Pass: ******* (contact lab for info) The Login and Pass are both lower case sensitive and seven digits each. The password is two alpha characters followed by 5 numbers. These are zeros not the letter o. After you enter this information, press the little shaking hands button on the left side of button row. This will start the connection. A Welcome Message will appear in the middle of your computer screen on top of the Session Window. Click the OK button to get rid of this. In the left middle panel Files on your Computer area. Navigate to find the folder you want to send to the lab. The folder must be closed and visible in the larger square section on left side. Click this folder to highlight it, then click the Queue for upload button. This is a little folder icon with red arrow, near the middle of the top row of buttons. You should now see your folder showing in the lower Queued Actions window. Now press the Green Go circle button in the button row to Start Transferring. Everything should start transferring. Along the bottom of the Session window you will see some text showing the status of the transfer. It takes about one minute to send one megabyte of data. After transfer is complete you can quit Bullet Proof. You now need to send an email to the lab telling us you have sent files and what you would like us to print. Send the email, AFTER you have finished the ftp, to: Realtime@pechmandirect.com This lets the system know you have done a successful upload of the file. See (link) eml_ series for samples.
| ||
 | | |
| | |